Rabbeting Block Plane with Nickers

[Shop Now !!!]

Years ago Sargent made a small rabbeting block plane No. 507. It's a great design handy as a block plane and wider than most rabbet planes making it easy to trim tenons to fit. Blade bedded at 12°. Non-adjustable mouth 1¾" (4.44cm) overall width 6¼" (15.87cm) long unbreakable Ductile Iron body. Bronze cap 1/8" (3.17mm)thick blade body ground flat and square to .001" (.0254mm).

• Our Rabbet Block Plane is 1¾" wide overall with a full width blade pitched at 12°.


• The sole is ground flat to .0015" and the sides are ground square to the sole.


• The mouth is fixed and set to take a maximum .005"-.008" shaving.

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

WoodRiver Standard Block Plane with Adjustable Mouth

[Shop Now !!!]

The WoodRiver Block Plane is based on the venerable Stanley #65 low angle and #18 standard angle Knuckle Cap design generally considered one of best block plane designs around. With the widely recognized comfortable chrome plated Knuckle Cap these block planes look like the standard and low angle versions of yester year. Upon closer inspection youll notice changes to the base castings which not only strengthen historically weak points of the original design but also improve the blade bedding area. Improved blade adjustment mechanisms allow for crisp easy adjustment of the blades using the rear adjustment knob. The adjustable mouth is very smooth to operate and allows fine tuning of the mouth for work ranging from coarse to creating whisper thin shavings. The stress relieved ductile iron castings are precision machined flat and square. Each plane is outfitted with a high carbon tool steel tool blade which is hardened to Rc60-64 for maximum edge retention and ground to a 25 degrees bevel. We recommend sharpening the blades prior to use however theyre impressively sharp right out of the box.

• Based On A Classic Design


• Knuckle Style Lever Cap


• 20 Degree bed angle


• High Carbon Tool Blade 25 Degree Blade Angle 1-5/8"W x 0.125"T


• 2"W x 7"L

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Wood Smooth Plane with 2" Hock Iron

[Shop Now !!!]

This body of this wooden smooth plane is made form a single piece of white oak.

The plane is equiped with a 2 inches wide Hock High Carbon iron assembly. The iron has not been honed. Hone the blade before first use. A good quality honing jig is highly recommended. Do it slowly and enjoy the process.

The iron assembly is hold in place with a wooden wedge under a brass pin. Use a small hammer to adjust the depth of cut. Always start with the lightest cut as you can at the very begining. After a little practice you should be able to make paper like shavings with whisper sound.

As all wooden products please wait for a few weeks before tuning the plane body until the wood settles in your own shop. A light coat of wax can also help protect the plane body.

• Hock High Carbon Iron Assembly Iron Width 2 Inches


• Dimension: Width: 68 mm; Length:245 mm; Height: ~60 mm


• White Oak plane body


• Hock Iron with Wooden Wedge and Brass Pin


• Iron requires honing before first use

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Stanley 12-404 No. 4 Adjustable Bench Plane with 2-Inch Cutter

[Shop Now !!!]

Stanley Tools 12-404 9 3/4" No. 4 Adjustable Bench PlaneStanley Tools 12-404 9 3/4" No. 4 Adjustable Bench Plane Features:; Grey cast iron base with sides and bottom machined smooth and true; Durable epoxy coating for long-lasting protection; Hardened and tempered tool steel cutter for cutting edge durability; Cutter is fully adjustable for depth of cut and alignment; Quick release cam-lock for easy blade removal; Contoured polymer handles and knobs; Replacement Blade 12-134-1 (do not stock); 9-3/4" length; 2" cutter width

• 9-3/4-inch adjustable bench plane with a 2-inch cutter


• Hardened tempered steel gives precision-ground cutter edge durability


• Gray cast-iron base with precision-ground sides and bottom; durable epoxy coating provides long-lasting protection


• High-impact polymer handles and knobs are contoured and polished


• 2-inch cutter; limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Stanley 12-951 SpokeShave with Flat Base

Stanley Tools 12-951 10" Spokeshave PlanerStanley Tools 12-951 10" Spokeshave Planer Features:; Ideal tools for shaping chair legs and seats curved templates and many other kinds of curved work; Cutters are fully adjustable for depth of cut and evenness of shaving thickness and are replaceable; Comes with a vinyl pouch for safe product storage when not in use; Replacement Blade 12-350 (do not stock); 2-1/8" cutter width; 10" length; Carded

• Woodworking hand tool designed for curved work


• Adjustable cutters ideal for shaping chair seats legs and other curved details


• Replaceable blades


• Includes vinyl pouch that protects plane when not in use


• Cutter width: 2-1/8 inches; tool length: 10 inches; limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]