KUNZ Spokeshave Radius

[Shop Now !!!]

KUNZ Radius Spokeshave. Sole and blade are ground to a 2" radius for smoothing concave surfaces. Length 10" blade width 2-1/16". These tools are factory ground and require honing before use.

• KUNZ radius spokeshave


• Sole and blade are ground to a 2" radius for smoothing concave surfaces


• Length 10 inches


• Blade width 2-1/16"


• Made in Germany

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Stanley 12-204 No 4 Smoothing Bench Plane

[Shop Now !!!]

Stanley Tools 12-204 9 3/4" No. 4 Smooth Bench Plane Stanley Tools 12-204 9 3/4" No. 4 Smooth Bench Plane Features: Grey cast iron base with sides and bottom machined smooth and true Durable epoxy coating for long-lasting protection Hardened and tempered tool steel cutter for cutting edge durability Cutter is fully adjustable for depth of cut and alignment Quick release cam-lock for easy blade removal Contoured polymer handles and knobs Replacement Blade 12-313 (2510-0595) 9-3/4" length 2" cutter width Carded

• Gray cast-iron base with precision-ground sides and bottom


• Durable epoxy coating provides long-lasting protection


• Hardened tempered steel gives precision-ground cutter edge durability


• Cutter adjusts for depth and alignment offering precise control. Quick-release cam-lock makes iron removal easy


• Limited Lifetime Warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

WoodRiver Standard Block Plane with Adjustable Mouth

[Shop Now !!!]

The WoodRiver Block Plane is based on the venerable Stanley #65 low angle and #18 standard angle Knuckle Cap design generally considered one of best block plane designs around. With the widely recognized comfortable chrome plated Knuckle Cap these block planes look like the standard and low angle versions of yester year. Upon closer inspection youll notice changes to the base castings which not only strengthen historically weak points of the original design but also improve the blade bedding area. Improved blade adjustment mechanisms allow for crisp easy adjustment of the blades using the rear adjustment knob. The adjustable mouth is very smooth to operate and allows fine tuning of the mouth for work ranging from coarse to creating whisper thin shavings. The stress relieved ductile iron castings are precision machined flat and square. Each plane is outfitted with a high carbon tool steel tool blade which is hardened to Rc60-64 for maximum edge retention and ground to a 25 degrees bevel. We recommend sharpening the blades prior to use however theyre impressively sharp right out of the box.

• Based On A Classic Design


• Knuckle Style Lever Cap


• 20 Degree bed angle


• High Carbon Tool Blade 25 Degree Blade Angle 1-5/8"W x 0.125"T


• 2"W x 7"L

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Wood Smooth Plane with 2" Hock Iron

[Shop Now !!!]

This body of this wooden smooth plane is made form a single piece of white oak.

The plane is equiped with a 2 inches wide Hock High Carbon iron assembly. The iron has not been honed. Hone the blade before first use. A good quality honing jig is highly recommended. Do it slowly and enjoy the process.

The iron assembly is hold in place with a wooden wedge under a brass pin. Use a small hammer to adjust the depth of cut. Always start with the lightest cut as you can at the very begining. After a little practice you should be able to make paper like shavings with whisper sound.

As all wooden products please wait for a few weeks before tuning the plane body until the wood settles in your own shop. A light coat of wax can also help protect the plane body.

• Hock High Carbon Iron Assembly Iron Width 2 Inches


• Dimension: Width: 68 mm; Length:245 mm; Height: ~60 mm


• White Oak plane body


• Hock Iron with Wooden Wedge and Brass Pin


• Iron requires honing before first use

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Low Angle Jack Plane

[Shop Now !!!]

The Lie-Nielsen Low Angle Jack Plane is based on the Stanley 62. Ours is an outstanding plane. The low angle blade set with the bevel up (making this technically a block plane) was originally designed for end grain work. Our massive blade makes for very smooth cutting on end or long grain and figured woods. The blade is shipped with a 25° flat bevel. Using higher angles up to 40° gives excellent results on difficult grain. This can easily be done by honing a small secondary bevel at the higher angle. An extra blade on hand prepared this way is very handy.

The generous handle is hand-shaped for a comfortable grip. The soles are ground dead flat. Design and workmanship combine to make a tool that will be a pleasure to own and use every day for years to come.

• 14" plane with a 2" blade bedded at 12°.


• Adjustable shoe allows easy precise adjustment of the mouth opening.


• Body is made from fully stress relieved Ductile Iron castings.


• A-2 Blade is a hefty 3/16" thick ground razor sharp.


• Cap iron is Bronze the knob and handle are hand-finished Cherry.

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]