No. 4 Bronze Smoothing Plane

[Shop Now !!!]

Bench Planes are the workhorses of the shop. We make all sizes that Stanley did from the tiny No. 1 to the huge No. 8. Each has its own charm but personal preference plays a large part in choosing the right bench plane for a particular job. A beginner needs two basic sizes - a smoothing plane (No. 4 or 4-1/2) and a Jointer (No. 7 or 8). A Jack Plane (usually a No. 5) would be the next most useful size.

The frog design is unique - a fully machined mating fit between the frog and the body. The design also allows precise and easy adjustments of the mouth opening from the rear without having to remove the cap and blade.

• 9-1/2" long with a 2" wide by .125" thick A-2 Steel blade


• Bronze body and cap Cherry handle and knob


• 45 degree High Angle Frog


• Improved Chipbreaker


• Capable of taking the finest shavings from the most difficult woods

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

No. 4 1/2 Smoothing Plane

[Shop Now !!!]

The Lie-Nielsen No. 4 1/2 Bench Plane is based on the Stanley Bedrock model. Bedrocks were the top of the line; heavier and better made than the standard. The frog design is unique; a fully machined mating fit between the frog and the body. The design also allows precise and easy adjustments of the mouth opening from the rear without having to remove the cap and blade.These features in addition to our A-2 cryogenically treated double-tempered Tool Steel blade make for a very solid tool that will give excellent results in the most demanding conditions.
Ductile Iron body hand-finished Cherry knobs and handles. Sole is machine ground sides machine ground square to the sole for shooting. Precisely made fit and finished this tool is ready for use right out of the box with minimal honing required.

• The ultimate Smoothing Plane.


• Massive .140" thick A-2 Steel blade.


• Blade width is 2-3/8" length of the tool is 10-3/8".


• Ductile Iron body Bronze frog and cap.


• Cherry handle and knob.

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Ebony Instrument Maker Compass/Convex Plane

[Shop Now !!!]

???This small size convex/compass plane is made from a single piece of premium grade macassar ebony a type of hard wood with delightful grain configuration. This type of plane can often be used by chairmakerinstrument maker and craftsmen working with detailing curved surface. It can act like a small carving gouge or scrub plane to shape a small area.

???The 18 mm wide and 2 mm thick cutting iron is made from special tool steel that hardened to Rc 60 ~ 61. The cutting edge has a radius of 9 mm inch and is bedded at 40?degree in the 90 mm long plane body. The cutting depth of the iron can be easily adjusted by means of using a small brass hammer.

???Final honing of the iron to suit individual preferences is recommended before first use. To hone this type of plane iron certain technique may apply depending on your sharpening method. Always start with lightest cut as you can. As you get fimilar with the plane you can adjust the depth of cut to your comfortable level.

• Special Tool Steel for the iron with brass thumb screw and cap


• Length: 90mm; Width: 27 mm;Height: ~20mm


• Premium grade macassar ebony for plane body


• Iron Width: 18mm; Iron Thickness: 2mm; Radius: ~ 9mm


• Honing required before use

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Robert Larson 825-5500 Radius Plane

[Shop Now !!!]

This is the easiest way to quickly radius the edge of your work. No need to set up a router simply reach for this radius plane and go to work. What makes this tool unique are the 2 carbide blades that make the cut. The leading blade takes off most of the

• 10"L x 1"W x 3.75"H


• Easiest way to quickly radius the edge of work


• Two carbide blades: leading blade takes off most of material and second blade finishes


• the


• Double spiraled flutes are machined instead of twisted

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]